Configuration Example for WAE deployment #1 - 3 legs scenario

This configuration example is useful when your WAE is attached to a dedicated router interface.

Router configuration
!
version 12.4
!
hostname R1
!
!
ip wccp 61
ip wccp 62
!
ip cef
!
ip domain name pandaeatsbamboo.com
!
!
interface FastEthernet0/0
description "To Local Area Network"
ip address 1.1.1.1 255.255.255.0
ip wccp 61 redirect in
duplex full
speed 100
!
interface FastEthernet0/1
description “To Cisco WAE Appliance”
ip address 2.2.2.1 255.255.255.0
duplex full
speed 100
!
interface Serial0
description “To Wide Area Network”
ip address 3.3.3.1 255.255.255.0
ip wccp 62 redirect in
!
end

WAE Configuration

! WAAS version 4.0.0
!
device mode application-accelerator
!
hostname WAE
!
clock timezone PST -8 0
ip domain-name pandaeatsbamboo.com
!
primary-interface GigabitEthernet 1/0
!
!
interface GigabitEthernet 1/0
ip address 2.2.2.2 255.255.255.0
no autosense
bandwidth 100
full-duplex
exit
interface GigabitEthernet 2/0
shutdown
exit
!
ip default-gateway 2.2.2.1
!
ip name-server 1.1.1.123
!
wccp version 2
wccp router-list 1 2.2.2.1
wccp tcp-promiscuous router-list-num 1
!
cdm ip 1.1.1.10
cms enable
!
policy-engine application