Tuesday, July 14, 2009

Post-init cnf creation is in progress, pls re-issue this command later

My environment: Cisco ISR 2821 router, IOS 12.4(24)T Advanced Enterprise
CME version: 7.1.0.1
If you see this error message when you issue the “create cnf-file” command, very likely that you have missed a configuration parameters under “telephony-service”
Make sure you have:
ip source-address 1.1.1.1 port 2000
under your telephony-service.
You’ll also need to synchronize you router hardware clock with the NTP source before issue the “create cnf-file” command.

An iPhone app for CME Config Generation:
http://itunes.apple.com/us/app/cme-config-generator/id453025819?ls=1&mt=8
at

5 comments:

  1. AnonymousJuly 31, 2009 at 11:04 PM

    Thanks, it solves my problem!

    ReplyDelete
  2. AnonymousSeptember 8, 2009 at 7:49 PM

    Thanks! It solves my problem too :)

    ReplyDelete
  3. UnknownNovember 26, 2009 at 1:49 AM

    He he he :) My too, good post :)

    ReplyDelete
  4. AnonymousJune 22, 2010 at 4:02 AM

    Hello, it helps me also. Thanks.

    ReplyDelete
  5. m05tar5.blogspot.comOctober 10, 2016 at 1:30 AM

    Hello < me too and the missing was max-dn #

    thanks

    ReplyDelete