My environment: CME 7.1, IOS 12.4(24)T1 on Cisco 2821 ISR
Extension mobility provides the benefit of mobility for end users, which allows a user with a configured profile to log into a phone other than their own and have access to their personal settings.
There are 4 configurable steps required for EM:
1. Configure CME for EM service:
c2821-cme(config)#ip http server
c2821-cme(config)#telephony-service
c2821-cme(config-telephony)#url authentication http://192.168.3.2/CCMCIP/authenticate.asp secretname psswrd
Updating CNF files
CNF files updating complete
c2821-cme(config-telephony)#authentication credential secretname psswrd
2. Configure a Logout profile for an IP phone (ephone):
c2821-cme(config)#voice logout-profile 1
c2821-cme(config-logout-profile)#pin 9999
c2821-cme(config-logout-profile)#user emphone password 123456
c2821-cme(config-logout-profile)#number 4005
3. Enable IP phone for EM:
c2821-cme(config-logout-profile)#ephone 2
c2821-cme(config-ephone)#logout-profile 1
4. Configure a user profile:
c2821-cme(config-ephone)#voice user-profile 1
c2821-cme(config-user-profile)#pin 12345
c2821-cme(config-user-profile)#user panda pass cisco
c2821-cme(config-user-profile)#number 4105
Configuration Video:
Screenshot:
Before Login
EM Service
Enter username and password defined in user-profile
Login Successfully
Logout
4 comments:
Hi,
I used your configuration but I have not the extension mobility service when I press the service button on the IP Phone.
Can you tell me how you have set up the service please ? Thank you
Hi,
I have not the extension mobility service when I press the service button on the ip phone. Can you tell me how did you configure the service ? Thank you
does the ip address you used at the beginning have a speacial meaning? Thank u
Post a Comment