EIGRP Stub Leak is a feature on Cisco router which allows EIGRP stub routers to leak route to peer routers. This is achieved by leak-map, which is a route map that permit specific route to leak through. A video is recorded to demonstrate how it works:
English version:
Chinese (Cantonese) version:
My environment: Cisco 3560E, IOS 12.2(53)SE
Auto Smartports Macros is a feature that provide easy and automatic way in deploying switchport configuration based on the endpoint types. The device is identified based on CDP, MAC address, OUI etc.
To enable Auto Smartports:
macro auto global processing
You might want to change the Auto Smarport Macro default value say for example the access and voice vlan, say for example if you want to change the IP phone access vlan to 10 and voice vlan to 20:
macro auto device phone ACCESS_VLAN=10 VOICE_VLAN=20
to verify the change, type:
show macro auto device
If the end device doesn’t support CDP, you can classify the device based on OUI (the first 3 bytes of the MAC address) or full MAC address. Say for example you want to use mac address trigger for your digital media player (DMP) which is not defined in the default OUI list.
macro auto mac-address group DMP-MAC-GROUP
mac-address list 000f.1234.5678
macro auto execute DMP-MAC-GROUP built-in CISCO_DMP_AUTO_SMARTPORT ACCESS_VLAN=10
to verify, type:
show macro auto address-group
To see which port applies what macros:
show macro auto interface
show run interface gi0/16
My environment: Cisco Catalyst 3560E
IOS: c3560e-universal-mz.122-35.SE5.bin
Before a PC can talk to another PC, it must do an ARP request to map the IP address to a MAC address.
For example:
Client A (ARP Request Broadcast): Who is 192.168.10.12?
Client B (ARP Reply): I am 192.168.10.12, mac address B
A client can send out unsolicited reply (gratuitous ARP) according to the ARP RFC. That means anyone can claim to be the owner of any IP-MAC address pair. ARP attack is using this to poison the ARP cache on switch and redirect the traffic.
Dynamic ARP inspection is a security feature to protect from ARP attack based on DHCP snooping binding database.
! Global Command
ip arp inspection vlan 168,201
! Interface that you want to trust
ip arp inspection trust
! Default untrust
no ip arp inspection trust
For those host with static IP address (not get address from DHCP server), their information will not be stored in the DHCP binding table therefore you will get reject message on the console.
Jun 5 12:31:40.734 HKT: %SW_DAI-4-DHCP_SNOOPING_DENY: 1 Invalid ARPs (Req) on Gi0/4, vlan 201.([000c.29f2.6a88/192.168.10.221/0000.0000.0000/192.168.10.254/12:31:39 HKT Fri Jun 5 2009])
In that case you’ll need to create an ARP access-list to allow static address hosts:
! Define ARP ACL
pandaeatsbamboo-sw01(config)#arp access-list allow-arp
pandaeatsbamboo-sw01(config-arp-nacl)#permit ip host 192.168.10.221 mac any
! Apply ARP ACL to DAI
pandaeatsbamboo-sw01(config)#ip arp inspection filter allow-arp vlan 201
My environment: Cisco Catalyst 3560E
IOS: c3560e-universal-mz.122-35.SE5.bin
One of the common DHCP server attack is rogue dhcp server attack, the potential problem is the attacker will become the hosts’ default gateway or DNS server. DHCP snooping can prevent it from happening by untrusting the switchport that are not connecting to the DHCP server.
! Global Command
! which vlan you would like to snoop
ip dhcp snooping vlan 168,201
! this is important otherwise this feature is not enabled
ip dhcp snooping
! Switchport configuration for DHCP server
int gi0/4
ip dhcp snooping trust
! User-facing switchport configuration, default untrust
int gi0/5
no ip dhcp snooping trust
To showing the DHCP snooping binding:
pandaeatsbamboo-sw01#sh ip dhcp snooping binding
MacAddress IpAddress Lease(sec) Type VLAN Interface
------------------ --------------- ---------- ------------- ---- --------------------
00:16:C8:FF:C4:6D 192.168.10.102 80179 dhcp-snooping 201 GigabitEthernet0/6
00:17:E0:1C:AB:1A 192.168.10.104 79680 dhcp-snooping 201 GigabitEthernet0/8
Total number of bindings: 2
DHCP Snooping table can be written to flash or external storage. Very importantly if you want to get the DHCP snooping database agent working, you MUST synchronize your switch with NTP, you can verify it with the command “sh ntp status”, make sure the clock is synchronized.
ip dhcp snooping database tftp://192.168.10.2/snoop.db
Then you can show ip dhcp snooping database to verify:
pandaeatsbamboo-sw01#sh ip dhcp snooping database
Agent URL : tftp://192.168.10.2/snoop.db
Write delay Timer : 15 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : 10:29:01 HKT Fri Jun 5 2009
Last Failed Time : 18:35:29 HKT Wed Jun 3 2009
Last Failed Reason : Unable to access URL.
Total Attempts : 1206 Startup Failures : 0
Successful Transfers : 1205 Failed Transfers : 1
Successful Reads : 2 Failed Reads : 0
Successful Writes : 1203 Failed Writes : 1
Media Failures : 0
Building explicit tunnels is a painful process, especially when you want to build fully meshed tunnels among a large number of routers. AutoTunnel mesh is a features that mesh LSRs automatically, greatly reduce administrative effort.
- Mesh Group - LSRs to mesh automatically
- Membership identified by
- Matching TE Router ID against ACL
- IGP mesh-group advertisment
- Each member automatically creates tunnel upon detection of a member
- Tunnels instantiated from template
- Individual tunnels not displayed in router configuration
Example Configuration
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R11
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
ip source-route
ip cef
!
!
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
mpls traffic-eng tunnelsmpls traffic-eng auto-tunnel backupmpls traffic-eng auto-tunnel meshmpls label protocol ldp !
!
voice dsp waitstate 0
!
!
!
!
!
!
!
!
!
!
!
!
!
memory-size iomem 0
archive
log config
hidekeys
!
!
!
!
!
!
!
!
!
interface Loopback0
ip address 11.11.11.11 255.255.255.0
!
interface Auto-Template1 ip unnumbered Loopback0 tunnel destination access-list 1 tunnel mode mpls traffic-eng tunnel bandwidth transmit 0 tunnel bandwidth receive 0 tunnel mpls traffic-eng autoroute announce tunnel mpls traffic-eng path-option 1 dynamic tunnel mpls traffic-eng fast-reroute node-protect no routing dynamic !
interface FastEthernet0/0
ip address 11.1.1.1 255.255.255.0
duplex auto
speed auto
mpls traffic-eng tunnels mpls label protocol ldp mpls ip ip rsvp bandwidth 100000 !
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet1/0
ip address 51.1.1.1 255.255.255.0
duplex auto
speed auto
mpls traffic-eng tunnels mpls label protocol ldp mpls ip ip rsvp bandwidth 100000 !
interface FastEthernet1/1
ip address 12.1.1.1 255.255.255.0
duplex auto
speed auto
mpls traffic-eng tunnels mpls label protocol ldp mpls ip ip rsvp bandwidth 100000 !
router ospf 1
mpls traffic-eng router-id Loopback0 mpls traffic-eng area 0 router-id 1.1.1.1
log-adjacency-changes
network 11.1.1.1 0.0.0.0 area 0
network 11.11.11.11 0.0.0.0 area 0
network 12.1.1.1 0.0.0.0 area 0
network 51.1.1.1 0.0.0.0 area 0
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
logging alarm informational
access-list 1 permit 11.11.11.11 access-list 1 permit 12.12.12.12 access-list 1 permit 21.21.21.21 access-list 1 permit 22.22.22.22 access-list 1 permit 31.31.31.31 access-list 1 permit 32.32.32.32 access-list 1 permit 41.41.41.41 access-list 1 permit 42.42.42.42 access-list 1 permit 51.51.51.51 access-list 1 permit 52.52.52.52 !
!
!
!
!
!
mpls ldp router-id Loopback0 force !
control-plane
!
!
!
mgcp fax t38 ecm
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
stopbits 1
line aux 0
stopbits 1
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
!
end
Output for “show ip int brie” – Tunnels are created automatically
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 11.1.1.1 YES NVRAM up up
FastEthernet0/1 unassigned YES NVRAM administratively down down
FastEthernet1/0 51.1.1.1 YES NVRAM up up
FastEthernet1/1 12.1.1.1 YES NVRAM up up
SSLVPN-VIF0 unassigned NO unset up up
Auto-Template1 11.11.11.11 YES TFTP up up
Loopback0 11.11.11.11 YES NVRAM up up
Tunnel64336 11.11.11.11 YES TFTP up up
Tunnel64337 11.11.11.11 YES TFTP up up
Tunnel64338 11.11.11.11 YES TFTP up up
Tunnel65436 11.11.11.11 YES TFTP up up
Tunnel65437 11.11.11.11 YES TFTP up up
Tunnel65438 11.11.11.11 YES TFTP up up
Output for “show mpls traffic-eng tunnel”
Name: R11_t64336 (Tunnel64336) Destination: 12.12.12.12
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 1)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: enabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: dynamic path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : FastEthernet0/0, implicit-null
FRR OutLabel : Tunnel65436, explicit-null
RSVP Signalling Info:
Src 11.11.11.11, Dst 12.12.12.12, Tun_Id 64336, Tun_Instance 7510
RSVP Path Info:
My Address: 11.1.1.1
Explicit Route: 11.1.1.2 12.12.12.12
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: 12.12.12.12(0)
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
History:
Tunnel:
Time since created: 3 days, 8 hours, 9 minutes
Time since path change: 3 days, 8 hours, 9 minutes
Number of LSP IDs (Tun_Instances) used: 82
Current LSP:
Uptime: 3 days, 8 hours, 9 minutes
Name: R11_t64337 (Tunnel64337) Destination: 21.21.21.21
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 1)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: enabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: dynamic path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : FastEthernet1/1, implicit-null
FRR OutLabel : Tunnel65437, explicit-null
RSVP Signalling Info:
Src 11.11.11.11, Dst 21.21.21.21, Tun_Id 64337, Tun_Instance 6021
RSVP Path Info:
My Address: 12.1.1.1
Explicit Route: 12.1.1.2 21.21.21.21
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: 21.21.21.21(0)
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
History:
Tunnel:
Time since created: 3 days, 8 hours, 9 minutes
Time since path change: 3 days, 8 hours, 8 minutes
Number of LSP IDs (Tun_Instances) used: 85
Current LSP:
Uptime: 3 days, 8 hours, 8 minutes
Name: R11_t64338 (Tunnel64338) Destination: 22.22.22.22
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 2)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: enabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: dynamic path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : FastEthernet0/0, 17
FRR OutLabel : Tunnel65438, explicit-null
RSVP Signalling Info:
Src 11.11.11.11, Dst 22.22.22.22, Tun_Id 64338, Tun_Instance 7897
RSVP Path Info:
My Address: 11.1.1.1
Explicit Route: 11.1.1.2 12.2.1.1 12.2.1.2 22.22.22.22
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: 12.12.12.12(17) 22.22.22.22(0)
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
History:
Tunnel:
Time since created: 3 days, 8 hours, 9 minutes
Time since path change: 3 days, 8 hours, 8 minutes
Number of LSP IDs (Tun_Instances) used: 82
Current LSP:
Uptime: 3 days, 8 hours, 8 minutes
Name: R11_t65436 (Tunnel65436) Destination: 12.12.12.12
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type explicit __dynamic_tunnel65436 (Basis for Setup, path weight 3)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: explicit path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : FastEthernet1/1, 25
RSVP Signalling Info:
Src 11.11.11.11, Dst 12.12.12.12, Tun_Id 65436, Tun_Instance 13
RSVP Path Info:
My Address: 12.1.1.1
Explicit Route: 12.1.1.2 22.1.1.1 22.1.1.2 12.2.1.2
12.2.1.1 12.12.12.12
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
History:
Tunnel:
Time since created: 3 days, 8 hours, 9 minutes
Time since path change: 3 days, 8 hours, 8 minutes
Number of LSP IDs (Tun_Instances) used: 13
Current LSP:
Uptime: 3 days, 8 hours, 8 minutes
Prior LSP:
ID: path option 1 [10]
Removal Trigger: path error
Name: R11_t65437 (Tunnel65437) Destination: 21.21.21.21
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type explicit __dynamic_tunnel65437 (Basis for Setup, path weight 3)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: explicit path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : FastEthernet0/0, 27
RSVP Signalling Info:
Src 11.11.11.11, Dst 21.21.21.21, Tun_Id 65437, Tun_Instance 6
RSVP Path Info:
My Address: 11.1.1.1
Explicit Route: 11.1.1.2 12.2.1.1 12.2.1.2 22.1.1.2
22.1.1.1 21.21.21.21
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
History:
Tunnel:
Time since created: 3 days, 8 hours, 9 minutes
Time since path change: 3 days, 8 hours, 8 minutes
Number of LSP IDs (Tun_Instances) used: 6
Current LSP:
Uptime: 3 days, 8 hours, 8 minutes
Prior LSP:
ID: path option 1 [4]
Removal Trigger: path error
Name: R11_t65438 (Tunnel65438) Destination: 22.22.22.22
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type explicit __dynamic_tunnel65438 (Basis for Setup, path weight 2)
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
Active Path Option Parameters:
State: explicit path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
InLabel : -
OutLabel : FastEthernet1/1, 24
RSVP Signalling Info:
Src 11.11.11.11, Dst 22.22.22.22, Tun_Id 65438, Tun_Instance 5
RSVP Path Info:
My Address: 12.1.1.1
Explicit Route: 12.1.1.2 22.1.1.1 22.1.1.2 22.22.22.22
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
History:
Tunnel:
Time since created: 3 days, 8 hours, 9 minutes
Time since path change: 3 days, 8 hours, 8 minutes
Number of LSP IDs (Tun_Instances) used: 5
Current LSP:
Uptime: 3 days, 8 hours, 8 minutes
Prior LSP:
ID: path option 1 [2]
Removal Trigger: path error
LSP Tunnel R12_t64336 is signalled, connection is up
InLabel : FastEthernet0/0, implicit-null
OutLabel : -
RSVP Signalling Info:
Src 12.12.12.12, Dst 11.11.11.11, Tun_Id 64336, Tun_Instance 6949
RSVP Path Info:
My Address: 11.11.11.11
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R12_t64338 is signalled, connection is up
InLabel : FastEthernet0/0, 17
OutLabel : FastEthernet1/1, implicit-null
FRR OutLabel : Tunnel65437, explicit-null
RSVP Signalling Info:
Src 12.12.12.12, Dst 21.21.21.21, Tun_Id 64338, Tun_Instance 2040
RSVP Path Info:
My Address: 12.1.1.1
Explicit Route: 12.1.1.2 21.21.21.21
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: 21.21.21.21(0)
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R12_t65436 is signalled, connection is up
InLabel : FastEthernet1/1, implicit-null
OutLabel : -
RSVP Signalling Info:
Src 12.12.12.12, Dst 11.11.11.11, Tun_Id 65436, Tun_Instance 12
RSVP Path Info:
My Address: 11.11.11.11
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R12_t65437 is signalled, connection is up
InLabel : FastEthernet0/0, 20
OutLabel : FastEthernet1/1, 29
RSVP Signalling Info:
Src 12.12.12.12, Dst 22.22.22.22, Tun_Id 65437, Tun_Instance 5
RSVP Path Info:
My Address: 12.1.1.1
Explicit Route: 12.1.1.2 22.1.1.1 22.1.1.2 22.22.22.22
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R21_t64337 is signalled, connection is up
InLabel : FastEthernet1/1, implicit-null
OutLabel : -
RSVP Signalling Info:
Src 21.21.21.21, Dst 11.11.11.11, Tun_Id 64337, Tun_Instance 1199
RSVP Path Info:
My Address: 11.11.11.11
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R21_t64338 is signalled, connection is up
InLabel : FastEthernet1/1, 16
OutLabel : FastEthernet0/0, implicit-null
FRR OutLabel : Tunnel65436, explicit-null
RSVP Signalling Info:
Src 21.21.21.21, Dst 12.12.12.12, Tun_Id 64338, Tun_Instance 2599
RSVP Path Info:
My Address: 11.1.1.1
Explicit Route: 11.1.1.2 12.12.12.12
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: 12.12.12.12(0)
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R21_t65436 is signalled, connection is up
InLabel : FastEthernet0/0, implicit-null
OutLabel : -
RSVP Signalling Info:
Src 21.21.21.21, Dst 11.11.11.11, Tun_Id 65436, Tun_Instance 6
RSVP Path Info:
My Address: 11.11.11.11
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R21_t65438 is signalled, connection is up
InLabel : FastEthernet1/1, 30
OutLabel : FastEthernet0/0, 30
RSVP Signalling Info:
Src 21.21.21.21, Dst 22.22.22.22, Tun_Id 65438, Tun_Instance 1
RSVP Path Info:
My Address: 11.1.1.1
Explicit Route: 11.1.1.2 12.2.1.1 12.2.1.2 22.22.22.22
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R22_t64336 is signalled, connection is up
InLabel : FastEthernet0/0, implicit-null
OutLabel : -
RSVP Signalling Info:
Src 22.22.22.22, Dst 11.11.11.11, Tun_Id 64336, Tun_Instance 8570
RSVP Path Info:
My Address: 11.11.11.11
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R22_t65436 is signalled, connection is up
InLabel : FastEthernet1/1, 19
OutLabel : FastEthernet0/0, implicit-null
RSVP Signalling Info:
Src 22.22.22.22, Dst 12.12.12.12, Tun_Id 65436, Tun_Instance 7
RSVP Path Info:
My Address: 11.1.1.1
Explicit Route: 11.1.1.2 12.12.12.12
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R22_t65437 is signalled, connection is up
InLabel : FastEthernet1/1, implicit-null
OutLabel : -
RSVP Signalling Info:
Src 22.22.22.22, Dst 11.11.11.11, Tun_Id 65437, Tun_Instance 6
RSVP Path Info:
My Address: 11.11.11.11
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel R22_t65438 is signalled, connection is up
InLabel : FastEthernet0/0, 21
OutLabel : FastEthernet1/1, implicit-null
RSVP Signalling Info:
Src 22.22.22.22, Dst 21.21.21.21, Tun_Id 65438, Tun_Instance 4
RSVP Path Info:
My Address: 12.1.1.1
Explicit Route: 12.1.1.2 21.21.21.21
Record Route: NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits