Tuesday, March 30, 2010

Create tftp bindings for phone firmware automatically on CME

My environment:  IOS 12.4(24)T1, CME 7.1, Cisco 2821
You can create automatic tftp bindings for all phone firmware instead of doing it manually one by one by using the “load” command under “telephony-service”.  Make sure you include the firmware file suffix in order to make the tftp binding automatically.  Without the suffix you need to configure it manually with the command “tftp-server flash:xxxx.loads”, etc.
load 7962 SCCP42.8-4-2S.loads
You might see this error after issuing the above load command:
LOAD COMMAND ERROR:cnf-file location system is not supported for creating automatic tftp bindings. Please use file location flash | slot0 | tftp OR create tftp bindings manually
Make sure you’ve entered the command “cnf-file location flash:” under “telephony-service” to specify the firmware location, then the error will go away!

An iPhone app for CME Config Generation:


Archilles "Clint" said...

It works! You saved my day.


Anonymous said...

Thanks a lot ! ;)

Anonymous said...

Excellent indeed!
You did also save my day.

AJ said...

Thank you very much for the info...

Gman said...

I have cisco 2921 phone
Version 15.1(4)M1 cme Version 8.6
facing issue phone regestration

9951 IP phones (SIP)

no file showing on command show telephony-service tftp-bindings .

also getting error messege on IP phone 9951 .

what is the problem , and how it will resolved.