Scenario: Wants to have CME IP phones talked to standalone EX90. In this test lab, 2 x 8945 phones are registered to CME 9.0 as a SCCP video end point. The CME, gateway, and gatekeeper are co-host in the same physical ISR G2 router. EX90 is registered to the gatekeeper directly as a H.323 terminal.
End result: 8945 calling EX90, 2 way video works. The negotiated resolution is 352x288, therefore on EX90 it doesn’t look great, however at least they can connect and make call to each other. Tried PVDM3 on ISRG2 as the video switching bridge, however it doesn’t work at all, one-way video is resulted.
Reference: http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00807ca099.shtml
Configuration
cme-video#sh run
Building configuration...
Current configuration : 5424 bytes
!
! Last configuration change at 18:58:41 HKT Tue Mar 20 2012
! NVRAM config last updated at 18:53:32 HKT Tue Mar 20 2012
! NVRAM config last updated at 18:53:32 HKT Tue Mar 20 2012
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname cme-video
!
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.152-2.T1.bin
boot-end-marker
!
!
!
no aaa new-model
!
clock timezone HKT 8 0
!
no ipv6 cef
ip auth-proxy max-login-attempts 5
ip admission max-login-attempts 5
!
!
!
ip dhcp excluded-address 192.168.100.1 192.168.100.100
!
ip dhcp pool phone-pool
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
option 150 ip 192.168.100.1
!
ip dhcp pool PC
network 192.168.200.0 255.255.255.0
default-router 192.168.200.1
!
!
no ip domain lookup
ip domain name ccievoice.com
ip cef
!
multilink bundle-name authenticated
!
!
!
!
!
crypto pki token default removal timeout 0
!
!
voice-card 0
voice-service dsp-reservation 0
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
registrar server expires max 1200 min 300
!
voice class h323 1
call start slow ! slow start is required for video
!
!
voice register global
mode cme
source-address 192.168.100.1 port 5060
max-dn 20
max-pool 20
timezone 42
time-format 24
date-format D/M/Y
create profile sync 0002883849114141
!
voice register dn 1
number 1001
name Phone 2
label +85225881001
!
voice register dn 2
number 1002
name Phone 3
label +85225881002
!
voice register pool 1
id mac 04C5.A4B0.D13C
type 9951
number 1 dn 1
dtmf-relay sip-notify
description --Phone 2--
codec g711ulaw
camera
video
!
voice register pool 2
id mac 1C17.D341.8FD2
type 9971
number 1 dn 2
dtmf-relay sip-notify
description --Phone 3--
codec g711ulaw
camera
video
!
voice register pool 3
!
!
!
!
!
license udi pid CISCO2911/K9 sn FHK1444F2EK
license accept end user agreement
hw-module pvdm 0/0
!
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address 192.168.100.1 255.255.255.0
h323-gateway voip interface
h323-gateway voip id GK ipaddr 192.168.100.1 1719
h323-gateway voip h323-id CME
!
interface GigabitEthernet0/0.200
encapsulation dot1Q 200
ip address 192.168.200.1 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/0/0
no ip address
!
interface GigabitEthernet0/0/1
no ip address
!
interface GigabitEthernet0/0/2
no ip address
!
interface GigabitEthernet0/0/3
no ip address
!
interface Vlan1
no ip address
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
mgcp profile default
!
sccp local GigabitEthernet0/0.100
sccp ccm 192.168.100.1 identifier 1 version 7.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register CFB-VIDEO
!
dspfarm profile 1 conference video homogeneous
codec g711ulaw
codec h264 cif frame-rate 30 bitrate 320kbps ! Meetme conference not working for EX90 (only send video, not receive video), only 2 x 8945 is working. Tried ad-hoc, error message results and only audio remains. Other resolution is worse. Point to Point video between EX90 and 8945 is CIF quality
maximum sessions 1
associate application SCCP
!
dial-peer voice 1005 voip
destination-pattern 1005
video codec h264
session target ras
voice-class h323 1
dtmf-relay h245-alphanumeric
codec g711ulaw
!
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
!
!
gateway
timer receive-rtp 1200
!
!
!
gatekeeper
zone local GK cisco.com
no shutdown
!
!
telephony-service
sdspfarm units 1
sdspfarm tag 1 CFB-VIDEO
no auto-reg-ephone
max-ephones 20
max-dn 20
ip source-address 192.168.100.1 port 2000
time-zone 42
time-format 24
date-format dd-mm-yy
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Mar 20 2012 18:13:08
!
!
ephone-template 1
softkeys hold Join Newcall Resume Select
softkeys idle Cfwdall ConfList Dnd Join Newcall Pickup Redial RmLstC
softkeys seized Endcall Redial Meetme Cfwdall Pickup
softkeys connected ConfList Confrn Endcall Hold Trnsfer Join Park RmLstC Select
!
!
ephone-dn 1 octo-line
number 1000
!
!
ephone-dn 2 octo-line
number 1004
!
!
ephone-dn 10 octo-line
number 1111
description --Meet Me Conf--
conference meetme video homogeneous
!
!
ephone-dn 20 octo-line
number 1234
conference ad-hoc video
!
!
ephone 1
device-security-mode none
description +85225881000
video
mac-address 503D.E57D.89C8
ephone-template 1
type 8945
button 1:1
!
!
!
ephone 2
device-security-mode none
video
mac-address 503D.E57D.87F8
ephone-template 1
type 8945
button 1:2
!
!
!
ephone 3
device-security-mode none
!
!
!
ephone 20
device-security-mode none
!
!
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
transport input all
line vty 5 40
login
transport input all
!
scheduler allocate 20000 1000
ntp master
!
end
No comments:
Post a Comment