Tuesday, July 14, 2009

Post-init cnf creation is in progress, pls re-issue this command later

My environment: Cisco ISR 2821 router, IOS 12.4(24)T Advanced Enterprise
CME version: 7.1.0.1
If you see this error message when you issue the “create cnf-file” command, very likely that you have missed a configuration parameters under “telephony-service”
Make sure you have:
ip source-address 1.1.1.1 port 2000
under your telephony-service.
You’ll also need to synchronize you router hardware clock with the NTP source before issue the “create cnf-file” command.

An iPhone app for CME Config Generation:
http://itunes.apple.com/us/app/cme-config-generator/id453025819?ls=1&mt=8

5 comments:

Anonymous said...

Thanks, it solves my problem!

Anonymous said...

Thanks! It solves my problem too :)

Unknown said...

He he he :) My too, good post :)

Anonymous said...

Hello, it helps me also. Thanks.

m05tar5.blogspot.com said...

Hello < me too and the missing was max-dn #

thanks