Sunday, February 26, 2012

MGCP Gateway Fallback Configuration Example

When you are deploying MGCP in branch office and the WAN connection between the MGCP gateway and UCM is broken, you can enable fallback on IOS gateway and route call based on your H.323 configuration.

These are the commands that you need to configure on your MGCP gateway.

R1(config)#ccm-manager fallback-mgcp

R1(config-app-global)#service alternate Default

Also configure the necessary incoming and outgoing voip and pots dial-peer as well as SRST configuration to handle the fallback situation.

No comments: